316 Stainless Steel Tactile c/w Carborundum Infill Self Adhesive Floorsafe

Quick-Fix self-adhesive 316 flat stainless tactile with black or yellow carborundum infill fitted with a 3M VHB double sided bonding system.

Technical Data 

• Code: T05SA 
• Material: Solid 316 Stainless Steel with Black or Yellow Carborundum Infill with 3M self-adhesive bonding compound
• Dimensions: Outer Diameter 35mm x top diameter 25mm x Height 4.5mm
• Slip Rating: P5 (test report available on request)

Features 

• Produced by CNC machine with milling finish 
• 8 Year warranty 
• Corrosion Proof

Compliance
Floorsafe Australia’s T05SA Carborundum Stainless Steel Tactiles comply with the following standards:

• National Construction CodeSection D3.8
• Australian/New Zealand Standard 1428.1 2009 – Design for access and mobility – Design for access and mobility: General requirements for access – New building works

Test – AS.NZS 1428.4.1 2009 Appendix E (pg 70-77)

• Australian/New Zealand Standard 1428.4.1 2009 – Design for access and mobility – Means to assist the orientation of people with vision impairment: Tactile ground surface indicators
• Australian/New Zealand Standard 4586 – 2013 – Slip resistance classification of new pedestrian surface materials

Installation Instructions
Make sure you remove any debris & dust and make sure the surface is completely dry.

Suitable Surfaces: Surfaces must be FLAT and SMOOTH e.g. tiles, concrete, timber, bluestone, stone, bitumen, metal etc.

1. Use masking tape to mark the area where the tactiles have to be installed.

2. Place the template into position and tape corners to hold the template firm.

3. Remove Release Paper from the back of the tactile and simply drop the tactile into the template

4. Using a rubber hammer tap lightly to make sure full adhesion occurs

5. Once the template is complete with the tactile lift and remove it.

6. To continue place the first 3 circle rows on the template over the last 3 rows of completed tactiles. This will make sure the line is running straight. Continue as item 3.

Luminance Contrast
The Building Code of Australian/New Zealand and the AS/NZS 1428.4.1 require a minimum luminance contrast of 30%. Guidelines are as follows

• Integrated tactile indicators – not less than 30% across the entire area 
• Discrete (individual) tactile indicators – not less than 45% 
• Where Discrete tactile indicators are constructed of two colours or materials the raised section shall have a minimum contrast of 60%