300 x 600 Directional Silicon Pad Floorsafe

300 x 600 Directional silicon Tactile Tacpads supplied with surface primer & adhesive. Available colours  yellow, grey, white, blue & terracotta.

Floorsafe 300mm x 600mm x 7mm Hazardous & Directional Tactile pads meet the requirements of the Australian standard AS/NZS4586:2004. Tacpads are an effective and cost-saving way of providing guidance cues. Conforms to the Disability Discrimination Act (DDA) Manufactured to Australian & New Zealand standards 1428.4: 2002 Table 1 Slip tested in accordance with AS/NZS: 4586:2004 Mean tested BPN 41 Class X Ramp test result R10 Meets the classification Y BPN 25-34 according to AS/NZS: 4586:2004

FLEXIBLE & EASY TO INSTALL
Floorsafe silicon coloured tactile Tacpads are supplied with a surface primer & a silicon base adhesive for fast & secured application. Available in 6 colours warning/hazardous & directional.

SUITABLE SURFACES
Surfaces must be clean & smooth otherwise full bonding will not occur and the pads could lift or bubble. Suitable for smooth concrete, timber, ceramic & vinyl tiles and smooth stone surfaces. We do not recommend installation onto bitumen surfaces.

ENHANCED BONDING TECHNIQUE
A special primer & adhesive is supplied with the Tacpads. The primer is a white liquid solution that is brushed or rolled onto the surface and left to dry for 10 – 15 minutes before applying the adhesive.

UV STABLE
Manufactured from a silicon rubber provides optimum UV stability and wear resistance. No colour fade reported after 48 months

OTHER FEATURES

• Guaranteed 10 Years
• Hardness Shore A 10-90
• Tensile Strength 11 N/mm2
• Elongation at break 100-1100%
• Maximum temperature + 300oC
• Minimum temperature -120oC