Clear quick drying primer used to aid adhesion of tapes to most surfaces
SURFACE PRIMER- FOR ALL TAPES
Eliminates poor adhesion that causes the tape to lift. Surface primer is a clear fast drying liquid that penetrates the surface leaving it clean from contaminants.
When dry a tacky film is left on the surface which allows all self-adhesive tapes to achieve a stronghold. Specially manufactured product to assist adhesion to most surfaces.
- USAGE: To prime porous surfaces before applying tapes & pads
- CONTAINER SIZES: 500mls, 1 Litre, 2 Litres & 5 Litres
- COLOUR: Clear liquid
SUBSTRATE PREPARATION
All surfaces to be clean and sound and free of efflorescence and contamination. Apply when the temperature is above 8 degrees and the substrate is not more than slightly dry.
APPLICATION
To a clean surface roll or brush apply. Rough and porous surfaces will need a second coat DRY TIME: 20 – 30 minutes pending upon temperature.
COVERAGE
8 – 10 Square metres 125mls for 18M x 50mm roll of anti-slip grip tape 10mls for 300mm x 300mm Tactile pad 20mls for 300mm x 600mm Tactile pad.
STORAGE
Keep sealed containers in a dry place. Keep away from sunlight.
TOXICITY
Non-Toxic
SOLVENT RESISTANCE
Non-Resistant
WEATHER RESISTANCE
Good
SHELF LIFE
2 Years
SAFETY DIRECTIONS
Avoid contact with skin, eyes & clothing
FIRST AID EYE CONTACT
Flush with plenty of water for at least 15 minutes. Get medical attention if irritation persists
SKIN CONTACT
Immediately wash skin with soap and plenty of water